GEO5 programs for geotechnical design and analysis
...

Watershed Modeling System Overview



The Watershed Modeling System (WMS) is a comprehensive graphical modeling environment for
all phases of watershed hydrology and hydraulics. WMS includes powerful tools to automate modeling processes such as automated basin delineation, geometric parameter calculations, GIS overlay computations (CN, rainfall depth, roughness coefficients, etc.), cross-section extraction from terrain data, and more! WMS supports hydrologic modeling with HEC-1, HEC-HMS, TR-20, TR-55, Rational...

From commercial building foundations to industrial mats and slabs on grade, engineers worldwide use spMats (formerly pcaMats, MATS) to optimize complicated foundations design, reinforcing and soil-structure interaction.

spMats, formerly pcaMats/MATS, is for analysis and design of concrete foundation mats, combined footings, and slabs on grade. The slab is modeled as an assemblage of rectangular finite elements. The boundary conditions may be the underlying soil, nodal springs, piles, or translational and rotational nodal restraints. The model is analyzed under static loads that may consist of uniform (surface) and concentrated loads. The resulting deflections, soil pressure (or spring reactions), and bending moments are output. In addition, the program computes the required area of reinforcing...

spFrame, formerly pcaFrame, is a feature-rich structural analysis program for two- and three-dimensional structures subject to static loads. Used by academic and industry professionals, it offers a quick and straightforward analysis tool.

spFrame has a fast and robust yet simple graphic interface that displays the modeled structure, the input loads, the deflected shape, and the resulting moment and shear diagrams. The graphic interface allows zooming, translating, rotating, and selective viewing of the graphical image.

With spFrame, you are able to view all output results in text or graphical formats before printing. Output includes: joint displacements and rotations, support reactions, member end forces and...

spWall, formerly pcaWall/PCA-Tilt/TILT, is for design and analysis of reinforced concrete walls, tilt-up walls, and precast architectural and load-bearing panels. It uses an advanced graphical interface that enables the user to easily generate complex wall models. The geometry of the wall (including any number of openings and stiffeners), the material properties, the loads (point, area, and line), and the support conditions are assigned graphically using the mouse. Also, springs (translational and rotational) can be graphically assigned at any node.

The program is based on the finite element method and can take into account second-order effects. The wall may include any number of openings and stiffeners. The amount of steel required for flexure...

As a limited edition of spSlab, spBeam features torsion effects in the shear design and investigation allowing engineers to achieve more economical cross sections where coupled shear and torsion occur (in accordance with US and Canadian codes). Save more in both material and labor with the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas.

spBeam performs a complete design for flexure and shear and the outputs the resulting reinforcement schedules (including bar numbers, sizes, lengths, and spacings). Torsional effects and Moment redistribution can be considered. spBeam offers a great deal of flexibility by allowing the user to modify the reinforcement configuration proposed by the program by switching from Design to...

spSlab analyzes beams, one-way slab systems (including standard and wide module joist systems), and two-way slab systems (including waffle and slab bands). With capacity to integrate up to 20 spans and two cantilevers of multiple floor system types in each model, the capabilities of spSlab are not limited to new designs. spSlab can perform strength investigation for evaluation and/or modifications of existing building slabs. This program is sure to save engineers time crosschecking designs with applicable design code provisions.

spSlab incorporates torsion into shear design and investigation of beam systems. Shear capacity including torsion is represented in terms of required and provided area of transverse and longitudinal reinforcement.
...

http://www.img.upnload.com/images/vtv8btkmgm12qe1i8ptq.jpg
http://www.img.upnload.com/images/xo5t48dl05i63tu56ts0.jpg
http://www.img.upnload.com/images/emoofb91omlor6uoin5l.jpg

Info:

Bentley’s ProStructures includes ProSteel and ProConcrete. Both are advanced 3D modeling programs supporting your constuction and planning tasks.

ProSteel provides detailing for structural steel and metal work and ProConcrete detailing and scheduling of reinforced insitu/precast and post-tensioned concrete structures.

ProStructures enables engineers to reduce documentation production time and assists them in eliminating errors and design flaws and to design and document composite structures


http://www.4shared.com/file/127144385/4f57af4c/PS__PC_V18part1.html
http://www.4shared.com/file/127147049/faa7bddc/PS__PC_V18part2.html

پسوورد:
www.civilea.com

توضیحات :
با استفاده از این نرم افزار میتوانید به راحتی خطوط لوله آب و فاضلاب را طراحی و آنالیز کنید این نرم افزار قادر است
تنش های وارده بر خطوط لوله را محاسبه کند
تنش وارده بر زانویی ها را محاسبه کرده و تکیه گاه ها را محاسبه کند.
نحاسبه تنش های وارده به خروجی (نازل) و محاسبه و طراحی ابزار آلات آن بر اساس بار های استاتیکی و دینامیکی وارد بر آن
طراحی بر اساس تمامی آئیین نامه های معتبر دنیا API, NEMA, ANSI, ASCE, AISC, UBC
و.........

There are three editions of AutoPIPE: Standard, Plus, and Nuclear. The Plus
version offers several advanced analysis capabilities not available in the standard.
...

PERFORM 3D is a highly focused nonlinear software tool for earthquake resistant design. Complex structures, including those with intricate shear wall layouts, can be analyzed nonlinearly using a wide variety of deformation-based and strength-based limit states.

Model data can be imported directly from ETABS and SAP2000. A wide variety of element types are supported, including beams (with panel zones), columns, braces, shear walls (with openings), floor slabs, dampers, and isolators.

Nonlinear analyses can be static and/or dynamic, and can be run on the same model. Loads can be applied in any sequence, such as a dynamic earthquake load followed by a static pushover.

PERFORM 3D provides powerful performance based design capabilities, and can calculate demand/capacity (usage) ratios for all components and all limit states. Performance assessment based...